Savitribai Phule Pune University · Maharashtra
SPPU CGPA Calculator
Also known as University of Pune · Pune University
2019 Pattern (CBCS) – Engineering, 2019 CBCS – Humanities, Science, Commerce and IDS & 2015 Pattern (Credit System) – Engineering · with CGPA to percentage
Updated Verified
Independent tool, not affiliated with SPPU. Confirm your result against your official grade card.
Your courses
Enter each course's credits and your grade. Grade points follow SPPU's 2019 Pattern (CBCS) – Engineering.
| Course (optional) | Credits | Grade | Remove |
|---|---|---|---|
Add your CGPA so far
Optional. Enter the CGPA on your last grade card and the credits it covers to see your new CGPA with this semester.
Worked example: SPPU SGPA
Three courses under 2019 Pattern (CBCS) – Engineering. Multiply each course's credits by its grade point, add the results, and divide by the total credits.
| Course | Grade | Grade point | Credits | Points |
|---|---|---|---|---|
| Course 1 | O | 10 | 4 | 40 |
| Course 2 | C | 7 | 3 | 21 |
| Course 3 | P | 4 | 3 | 12 |
| Total | 10 | 73 |
The SGPA for several terms works the same way: weight each term's result by its credits. The calculator above does this for you.
How your result is calculated
SPPU B.E. (engineering) students of the 2019 pattern (CBCS): the equivalent percentage of the final CGPA. SPPU publishes only these five values for engineering and gives no formula between them.
Sources: Savitribai Phule Pune University, Circular No. 117/2020 - Choice Based Credit System 2019: revised rules on Evaluation Criteria (Evaluation Criterions for Choice Based Credit System) (retrieved 2 Oct 2026); Savitribai Phule Pune University (Examination Section), 2019 Pattern CBCS 10 Point Credit System - Details about Grades and Grade Points (Marksheet Information: 2019 CBCS Conventional Programs) (retrieved 2 Oct 2026). Checked against the document on 3 Oct 2026.
SPPU UG degrees under CBCS from 2019–20 in Humanities, Science, Commerce and Interdisciplinary Studies, whose final grade is O, A+, A, B+, B, C or D. Engineering and architecture use separate SPPU rules.
Sources: Savitribai Phule Pune University (Academic Section), Circular No. 332/2020 - Approval for Conversion Equation of CGPA to Percentage (UG degree programmes of all faculties under CBCS from A.Y. 2019-20) (retrieved 2 Oct 2026); Savitribai Phule Pune University, Boards And Meetings Circulars: Circular No. 332-2020 - Approval for Conversion Equation of CGPA to Percentage_08_122020 (list item) (retrieved 3 Oct 2026); Savitribai Phule Pune University, Circular No. 117/2020 - Choice Based Credit System 2019: revised rules on Evaluation Criteria (Evaluation Criterions for Choice Based Credit System) (retrieved 2 Oct 2026); Savitribai Phule Pune University, 2019 Pattern CBCS 10 Point Credit System : Grade Point Details (marksheet legend, '2019 Conventional programs') (retrieved 3 Oct 2026). Checked against the document on 3 Oct 2026.
SPPU B.Arch. (2015 and 2019 patterns) and M.Arch. students.
Sources: Savitribai Phule Pune University, BArch 2019 pattern (marksheet legend) (retrieved 3 Oct 2026); Savitribai Phule Pune University, BArch 2015 pattern (marksheet legend) (retrieved 3 Oct 2026); Savitribai Phule Pune University, Master of Architecture (marksheet legend, 'MArch (All Patterns)') (retrieved 3 Oct 2026); Savitribai Phule Pune University, Circular No. 193/2021 - correction in Grade to percentage conversion and class table formula, architecture courses, Faculty of Science and Technology (retrieved 3 Oct 2026); Savitribai Phule Pune University, Conversion from CGPA to percentage (retrieved 3 Oct 2026). Checked against the document on 3 Oct 2026.
- Grades come from the in-semester and end-semester marks of a course taken together.
- 2019-pattern engineering has no separate passing minimum for the in-semester exam: a subject needs at least 28/70 in the end-semester exam and 40/100 overall.
- SGPA = Σ(credits × grade points) ÷ Σ credits for the semester; CGPA is calculated the same way over all semesters (semester 3 onwards for students admitted directly to the second year).
- When a failed course is passed, or a grade is improved, the new grade replaces the earlier one in SGPA and CGPA.
- SGPA and CGPA are calculated to two decimal places by rounding off.
- ACN (audit course not completed) carries no grade point.
- SGPA = Σ(grade points earned × credits for each course) ÷ total credits of the semester.
- CGPA = Σ(grade points earned × credits for each course) ÷ total credits, over all semesters.
- PP (passed) and NP (not passed) are used only for non-credit courses and carry no grade point.
- The final grade comes from the CGPA: O 9.50 and above; A+ 8.25 to less than 9.50; A 6.75 to less than 8.25; B+ 5.75 to less than 6.75; B 5.25 to less than 5.75; C 4.75 to less than 5.25; D 4.00 to less than 4.75.
Sources: Savitribai Phule Pune University, Circular No. 117/2020 - Choice Based Credit System 2019: revised rules on Evaluation Criteria (Evaluation Criterions for Choice Based Credit System) (retrieved 2 Oct 2026); Savitribai Phule Pune University (Examination Section), 2019 Pattern CBCS 10 Point Credit System - Details about Grades and Grade Points (Marksheet Information: 2019 CBCS Conventional Programs) (retrieved 2 Oct 2026); Savitribai Phule Pune University, UG Choice Based Credit System - Rules and Regulations for Under Graduate Programme in Engineering under Faculty of Science and Technology with effective from A.Y. 2019-20 (retrieved 2 Oct 2026); Savitribai Phule Pune University (Examination Section), 10 Point Credit System - Details about Grades & Grade Points (Marksheet Information: Professional courses 2015 pattern onward Engineering, MBA and others) (retrieved 2 Oct 2026); Savitribai Phule Pune University, 2019 Pattern CBCS 10 Point Credit System : Grade Point Details (marksheet legend, '2019 Conventional programs') (retrieved 3 Oct 2026). Checked against the document on 2 Oct 2026.
| Awarded | CGPA | Conditions |
|---|---|---|
| First Class with Distinction | 7.75 and above | — |
| First Class | 6.75–7.75 | — |
| Higher Second Class | 6.25–6.75 | — |
| Second Class | 5.5–6.25 | — |
B.E. students of the 2019 pattern (CBCS) at SPPU-affiliated engineering colleges (courses under AICTE). As printed in Table 12: '7.75 or More than 7.75'; '6.75 or more but less than 7.75'; '6.25 or more but less than 6.75'; '5.5 or more but less than 6.25'. Upper bounds are exclusive. Circular 117/2020 and the 2019 CBCS marksheet legend print the same thresholds as 'CGPA of … and above'. No Pass Class band is printed in any of the three SPPU documents (the 4.00–5.49 'Pass' band seen on third-party sites is not in them). Circular 117/2020 gives Pharmacy courses their own bands (First Class with Distinction 7.50 and above; First Class 6.00 to 7.49; Second Class 5.00 to 5.99); no SPPU pharmacy grading scale exists in the registry, so they are not recorded as a row.
Sources: Savitribai Phule Pune University, UG Choice Based Credit System - Rules and Regulations for Under Graduate Programme in Engineering under Faculty of Science and Technology with effective from A.Y. 2019-20 (retrieved 2 Oct 2026); Savitribai Phule Pune University, Circular No. 117/2020 - Choice Based Credit System 2019: revised rules on Evaluation Criteria (Evaluation Criterions for Choice Based Credit System) (retrieved 2 Oct 2026); Savitribai Phule Pune University (Examination Section), 2019 Pattern CBCS 10 Point Credit System - Details about Grades and Grade Points (Marksheet Information: 2019 CBCS Conventional Programs) (retrieved 2 Oct 2026). Checked against the document on 8 Oct 2026.
| Awarded | CGPA | Conditions |
|---|---|---|
| O (Outstanding) | 9.5 and above | — |
| A+ (Excellent) | 8.25–9.5 | — |
| A (Very Good) | 6.75–8.25 | — |
| B+ (Good) | 5.75–6.75 | — |
| B (Above Average) | 5.25–5.75 | — |
| C (Average) | 4.75–5.25 | — |
| D (Pass) | 4–4.75 | — |
UG degrees under CBCS from 2019–20 in Humanities, Science, Commerce and Interdisciplinary Studies at SPPU (UGC courses, not engineering). The circular says the class 'shall be awarded on the basis of CGPA' and prints a grade letter (O to D) for each CGPA range. As printed: '9.50 and above'; '8.25 or more but less than 9.50'; '6.75 or more but less than 8.25'; '5.75 or more but less than 6.75'; '5.25 or more but less than 5.75'; '4.75 or more but less than 5.25'; '4.00 or more but less than 4.75'. Upper bounds are exclusive. Same clause: because students and employers ask for a class, an 'equivalent class' is declared on passing certificates only, using the grade-wise CGPA-to-percentage formula on page 18 of the UG CBCS Science handbook (recorded as the SPPU UGC conversion row). The circular does not print a percentage-to-class table.
Source: Savitribai Phule Pune University, Circular No. 117/2020 - Choice Based Credit System 2019: revised rules on Evaluation Criteria (Evaluation Criterions for Choice Based Credit System) (retrieved 2 Oct 2026). Checked against the document on 8 Oct 2026.
| Grade | Marks (%) | Grade point | Meaning |
|---|---|---|---|
| O | 90–100 | 10 | Outstanding |
| A | 80–89 | 9 | Excellent |
| B | 70–79 | 8 | Very Good |
| C | 60–69 | 7 | Good |
| D | 50–59 | 6 | Above Average |
| E | 45–49 | 5 | Average |
| P | 40–44 | 4 | Pass |
| F | 0–39 | 0 | Fail |
| Ab | — | 0 | Absent |
| FX | — | 0 | Detained, Repeat the Course |
| IC | — | 0 | Incomplete Course - Absent for Exam but continue for the course |
| AC | — | 0 | Audit Course Completed |
B.E. students of the 2019 pattern (CBCS) at SPPU-affiliated engineering colleges.
Sources: Savitribai Phule Pune University, Circular No. 117/2020 - Choice Based Credit System 2019: revised rules on Evaluation Criteria (Evaluation Criterions for Choice Based Credit System) (retrieved 2 Oct 2026); Savitribai Phule Pune University (Examination Section), 2019 Pattern CBCS 10 Point Credit System - Details about Grades and Grade Points (Marksheet Information: 2019 CBCS Conventional Programs) (retrieved 2 Oct 2026); Savitribai Phule Pune University, UG Choice Based Credit System - Rules and Regulations for Under Graduate Programme in Engineering under Faculty of Science and Technology with effective from A.Y. 2019-20 (retrieved 2 Oct 2026). Checked against the document on 2 Oct 2026.
SPPU grading table · 2019 CBCS – Humanities, Science, Commerce and IDS
| Grade | Marks (%) | Grade point | Meaning |
|---|---|---|---|
| O | 90–100 | 10 | Outstanding |
| A+ | 75–89 | 9 | Excellent |
| A | 60–74 | 8 | Very Good |
| B+ | 55–59 | 7 | Good |
| B | 50–54 | 6 | Above Average |
| C | 45–49 | 5 | Average |
| D | 40–44 | 4 | Pass |
| F | 0–39 | 0 | Fail |
| Ab | — | 0 | Absent |
| FX | — | 0 | Detained, Repeat the Course |
| IC | — | 0 | Incomplete Course - Absent for Exam but continue for the course |
| AC | — | 0 | Audit Course Completed |
UG and PG students of SPPU-affiliated colleges in Humanities, Science, Commerce and Interdisciplinary Studies under CBCS from 2019–20 (not engineering).
Sources: Savitribai Phule Pune University, Circular No. 117/2020 - Choice Based Credit System 2019: revised rules on Evaluation Criteria (Evaluation Criterions for Choice Based Credit System) (retrieved 2 Oct 2026); Savitribai Phule Pune University, 2019 Pattern CBCS 10 Point Credit System : Grade Point Details (marksheet legend, '2019 Conventional programs') (retrieved 3 Oct 2026). Checked against the document on 2 Oct 2026.
SPPU grading table · 2015 Pattern (Credit System) – Engineering
| Grade | Marks (%) | Grade point | Meaning |
|---|---|---|---|
| O | 80–100 | 10 | Outstanding |
| A+ | 70–79 | 9 | Excellent |
| A | 60–69 | 8 | Very Good |
| B+ | 55–59 | 7 | Good |
| B | 50–54 | 6 | Above Average |
| C | 45–49 | 5 | Average |
| P | 40–44 | 4 | Pass |
| F | 0–39 | 0 | Fail |
| AB | — | 0 | Absent |
| AP | — | 0 | Passed Audit Course |
| FX | — | 0 | Detained, Repeat the Course |
| IC | — | 0 | Incomplete - Absent for Exam but continue for course |
B.E. students of the 2015 credit pattern at SPPU-affiliated engineering colleges (SPPU marksheet legend for professional courses: engineering, MBA and others).
Source: Savitribai Phule Pune University (Examination Section), 10 Point Credit System - Details about Grades & Grade Points (Marksheet Information: Professional courses 2015 pattern onward Engineering, MBA and others) (retrieved 2 Oct 2026). Checked against the document on 2 Oct 2026.
Questions
How is SPPU SGPA calculated?
SGPA is the average of your grade points weighted by credits: multiply each course's credits by the grade point for your grade, add these up, and divide by the total credits. Under 2019 Pattern (CBCS) – Engineering, O carries 10 grade points on a 10-point scale.
How is SPPU CGPA calculated?
CGPA is the average of the grade points of all courses taken so far, weighted by credits.
What is 7.75 CGPA in percentage at SPPU?
Under SPPU's published rule (Official table: 6.25 → 55% · 6.75 → 60% · 7.25 → 65% · 7.75 → 70% · 8.25 → 75%), a CGPA of 7.75 equals 70%. SPPU B.E. (engineering) students of the 2019 pattern (CBCS): the equivalent percentage of the final CGPA. SPPU publishes only these five values for engineering and gives no formula between them.
What is 8.25 CGPA in percentage at SPPU?
Under SPPU's published rule (Official table: 6.25 → 55% · 6.75 → 60% · 7.25 → 65% · 7.75 → 70% · 8.25 → 75%), a CGPA of 8.25 equals 75%. SPPU B.E. (engineering) students of the 2019 pattern (CBCS): the equivalent percentage of the final CGPA. SPPU publishes only these five values for engineering and gives no formula between them.
What are the grade points at SPPU?
Under 2019 Pattern (CBCS) – Engineering: O (90%+) = 10, A (80%+) = 9, B (70%+) = 8, C (60%+) = 7, D (50%+) = 6, E (45%+) = 5, and so on (full table on this page).
What is the lowest passing grade at SPPU?
P (40% and above), worth 4 grade points, is the lowest passing grade under 2019 Pattern (CBCS) – Engineering.
Does a failed course count in the SPPU GPA?
When a failed course is passed, or a grade is improved, the new grade replaces the earlier one in SGPA and CGPA.
Is the SPPU GPA rounded?
SGPA and CGPA are calculated to two decimal places by rounding off.
What happens to my GPA if I repeat a course at SPPU?
When a failed course is passed, or a grade is improved, the new grade replaces the earlier one in SGPA and CGPA.
What CGPA is First Class with Distinction at SPPU?
Class of the degree (Engineering, 2019 pattern): First Class with Distinction 7.75 or more; First Class 6.75 to 7.75; Higher Second Class 6.25 to 6.75; Second Class 5.5 to 6.25. As printed in Table 12: '7.75 or More than 7.75'; '6.75 or more but less than 7.75'; '6.25 or more but less than 6.75'; '5.5 or more but less than 6.25'. Upper bounds are exclusive. Circular 117/2020 and the 2019 CBCS marksheet legend print the same thresholds as 'CGPA of … and above'.
How do I convert SPPU CGPA to percentage?
SPPU's published rule is: Official table: 6.25 → 55% · 6.75 → 60% · 7.25 → 65% · 7.75 → 70% · 8.25 → 75%. SPPU B.E. (engineering) students of the 2019 pattern (CBCS): the equivalent percentage of the final CGPA. SPPU publishes only these five values for engineering and gives no formula between them.
Is OpenCGPA an official SPPU calculator?
No. OpenCGPA is independent and not affiliated with Savitribai Phule Pune University. It applies the rules published in SPPU's own documents, linked on this page. Your official result is the one on your grade card.