BUET GPA & CGPA Calculator
Your courses
Enter each course's credit hours and your grade. Grade points follow BUET's Undergraduate course system.
| Course (optional) | Credit hours | Grade | Remove |
|---|---|---|---|
How your result is calculated
- GPA = Σ (credits × grade point) ÷ Σ credits over the courses passed/completed in the term; F grades are not counted in the GPA but stay permanently on the grade sheet and transcript.
- CGPA = total grade points accumulated to date ÷ total credit hours earned.
- Courses graded D or higher count as earned credits; an F earns no credit, and an F in a core course must be repeated (an F in an optional course may be repeated or replaced by a substitute course).
- A course repeated after an F can earn no grade better than B.
- A course graded below B may be repeated once for grade improvement, giving up the earlier grade, with B as the best grade obtainable; at most four courses (B.Sc. Engg. and B.URP) or five courses (B.Arch.) may be repeated this way. A course graded B or better cannot be repeated for improvement.
- X (continuation) is given for project, thesis and design courses that run on into the next term.
- A minimum GPA of 2.20 is required for the bachelor's degree, with at least 157 credit hours earned in engineering and 190 in architecture.
- The degree is awarded with honours for an overall GPA of 3.75 or better.
Sources: Department of Civil Engineering, Bangladesh University of Engineering and Technology, Course Curriculum for Undergraduate Studies (Department of Civil Engineering, BUET), Eighth Edition, June 2026 (retrieved 2 Oct 2026); Bangladesh University of Engineering and Technology (Registrar's Office), Rules and Regulations for Course System (retrieved 2 Oct 2026). Checked against the document on 2 Oct 2026.
| Grade | Marks (%) | Grade point | Meaning |
|---|---|---|---|
| A+ | 80–100 | 4 | |
| A | 75–80 | 3.75 | |
| A- | 70–75 | 3.5 | |
| B+ | 65–70 | 3.25 | |
| B | 60–65 | 3 | |
| B- | 55–60 | 2.75 | |
| C+ | 50–55 | 2.5 | |
| C | 45–50 | 2.25 | |
| D | 40–45 | 2 | |
| F | 0–40 | 0 | |
| X | — | Not in GPA | Continuation (for project & thesis / design courses) |
Bachelor's degrees in engineering, urban and regional planning and architecture at BUET (Rules and Regulations for the Course System, with amendments up to May 2021).
Sources: Department of Civil Engineering, Bangladesh University of Engineering and Technology, Course Curriculum for Undergraduate Studies (Department of Civil Engineering, BUET), Eighth Edition, June 2026 (retrieved 2 Oct 2026); Bangladesh University of Engineering and Technology (Registrar's Office), Rules and Regulations for Course System (retrieved 2 Oct 2026). Checked against the document on 2 Oct 2026.
Questions
How is BUET Term GPA calculated?
Term GPA is the average of your grade points weighted by credit hours: multiply each course's credit hours by the grade point for your grade, add these up, and divide by the total credit hours. Under Undergraduate course system, A+ carries 4 grade points on a 4-point scale.
How is BUET CGPA calculated?
CGPA is the average of the grade points of all courses taken so far, weighted by credit hours.
Is OpenCGPA an official BUET calculator?
No. OpenCGPA is independent and not affiliated with Bangladesh University of Engineering and Technology. It applies the rules published in BUET's own documents, linked on this page. Your official result is the one on your grade card.