Moratuwa GPA Calculator
Your courses
Enter each course's credits and your grade. Grade points follow Moratuwa's B.Sc. Eng. Hons, 2020 intake onwards.
| Course (optional) | Credits | Grade | Remove |
|---|---|---|---|
How your result is calculated
Moratuwa's regulation adds conditions to this average; they are listed in the rules below.
- The mark ranges are benchmarks for examiners; the examiner and moderator may amend them under Faculty guidelines.
- Grades A+ to D need at least 35% in both the written examination and the continuous assessment. Below 35% in both gives F; below 35% in only one gives I-we (written examination) or I-ca (continuous assessment). F, I-we and I-ca carry 0.0 grade points.
- A grade of D or above is needed to earn credit for a module.
- SGPA = Σ (credits × grade point) ÷ Σ credits over the modules registered for credit in the semester, rounded to two decimal places. Modules with N (academic concession) or W (withdrawn) are left out.
- The Current GPA (CGPA) covers all modules registered for credit up to that point, and each semester is given uniform weight. The Overall GPA (OGPA), used for classes, is the final standing based on the CGPA of all registered modules.
- Non-GPA modules (including industrial training) do not count towards the SGPA, CGPA, OGPA or the award of classes.
- At a repeat attempt the highest grade normally obtainable is C (exceptions: an academic concession, or Senate approval for a particular module).
- Classes by Overall GPA (within five academic years): First Class 3.70 or above; Second Class Upper Division 3.30–3.69; Second Class Lower Division 3.00–3.29; Pass 2.00–2.99. The degree needs an Overall GPA of at least 2.00.
- At a repeat attempt the highest grade normally obtainable is C, except in the cases set out by the Faculty (clause 4.2.10).
Sources: University of Moratuwa, Faculty of Engineering, Performance Criteria For The Degree of the Bachelor of the Science of Engineering Honours (Performance Criteria 31:2020, Effective from 2020 Intake) (retrieved 2 Oct 2026); University of Moratuwa, Faculty of Engineering (Undergraduate Studies Division), Performance Criteria | University of Moratuwa (retrieved 2 Oct 2026); University of Moratuwa, Faculty of Engineering, Performance Criteria for the Honours Degree of the Bachelor of the Science of Engineering in the Faculty of Engineering (Performance Criteria 31:2013, Effective for 2013 Intake Onwards) (retrieved 2 Oct 2026). Checked against the document on 2 Oct 2026.
| Grade | Marks (%) | Grade point | Meaning |
|---|---|---|---|
| A+ | 85–100 | 4 | |
| A | 75–84 | 4 | Excellent |
| A- | 70–74 | 3.7 | |
| B+ | 65–69 | 3.3 | |
| B | 60–64 | 3 | Good |
| B- | 55–59 | 2.7 | |
| C+ | 50–54 | 2.3 | |
| C | 45–49 | 2 | Pass |
| C- | 40–44 | 1.7 | Weak Pass |
| D | 35–39 | 1 | Conditional Pass |
| F | — | 0 | Fail |
| I-we | — | 0 | Incomplete - Written Examination |
| I-ca | — | 0 | Incomplete - Continuous Assessments |
| N | — | Not in GPA | Academic Concession |
| W | — | Not in GPA | Withdrawn |
B.Sc. Engineering Honours students of the Faculty of Engineering, University of Moratuwa, admitted from the 2020 intake onwards (Performance Criteria 31:2020).
Sources: University of Moratuwa, Faculty of Engineering, Performance Criteria For The Degree of the Bachelor of the Science of Engineering Honours (Performance Criteria 31:2020, Effective from 2020 Intake) (retrieved 2 Oct 2026); University of Moratuwa, Faculty of Engineering (Undergraduate Studies Division), Performance Criteria | University of Moratuwa (retrieved 2 Oct 2026). Checked against the document on 2 Oct 2026.
| Grade | Marks (%) | Grade point | Meaning |
|---|---|---|---|
| A+ | 85–100 | 4.2 | |
| A | 75–84 | 4 | Excellent |
| A- | 70–74 | 3.7 | |
| B+ | 65–69 | 3.3 | |
| B | 60–64 | 3 | Good |
| B- | 55–59 | 2.7 | |
| C+ | 50–54 | 2.3 | |
| C | 45–49 | 2 | Pass |
| C- | 40–44 | 1.5 | Weak Pass |
| D | 35–39 | 1 | Conditional Pass |
| F | — | 0 | Fail |
| I-we | — | 0 | Incomplete - Written Examination |
| I-ca | — | 0 | Incomplete - Continuous Assessments |
| N | — | Not in GPA | Academic Concession |
| W | — | Not in GPA | Withdrawn |
B.Sc. Engineering Honours students of the Faculty of Engineering, University of Moratuwa, admitted from the 2013 intake until the 2020 criteria took over (Performance Criteria 31:2013).
Sources: University of Moratuwa, Faculty of Engineering, Performance Criteria for the Honours Degree of the Bachelor of the Science of Engineering in the Faculty of Engineering (Performance Criteria 31:2013, Effective for 2013 Intake Onwards) (retrieved 2 Oct 2026); University of Moratuwa, Faculty of Engineering (Undergraduate Studies Division), Performance Criteria | University of Moratuwa (retrieved 2 Oct 2026). Checked against the document on 2 Oct 2026.
Questions
How is Moratuwa Semester GPA (SGPA) calculated?
Semester GPA (SGPA) is the average of your grade points weighted by credits: multiply each course's credits by the grade point for your grade, add these up, and divide by the total credits. Under B.Sc. Eng. Hons, 2020 intake onwards, A+ carries 4 grade points on a 4-point scale.
How is Moratuwa Current GPA (CGPA) calculated?
Current GPA (CGPA) is the average of your term Semester GPA (SGPA)s weighted by credits: multiply each term's Semester GPA (SGPA) by its credits, add them up and divide by the total credits.
Is OpenCGPA an official Moratuwa calculator?
No. OpenCGPA is independent and not affiliated with University of Moratuwa. It applies the rules published in Moratuwa's own documents, linked on this page. Your official result is the one on your grade card.