UTS SGPA & CGPA Calculator
Your courses
Enter each course's credit points and your grade. Grade points follow UTS's 7-point GPA (from 14 January 2020).
| Course (optional) | Credit points | Grade | Remove |
|---|---|---|---|
How your result is calculated
- GPA = sum of (subject grade point × credit points) ÷ total credit points enrolled; all GPA values lie between 0.00 and 7.00.
- Grades for all enrolled subjects in the course count, including fail results (Fail (X), Fail (Z) and Withdrawn Fail count as 0); ungraded Pass/Fail subjects are left out.
- The GPA is calculated on finalised subjects only: with unresolved or withheld grades no GPA is shown.
- 'Automatic Credit' on your transcript from previous UTS study (recognition of prior learning) is included in the GPA.
- Each UTS course has its own GPA.
- From 14 January 2020 grade points were raised to the 7-point scale and every GPA calculated since Autumn 2008 was recalculated on it.
- Calculated the same way as the 7-point GPA: sum of (grade point × credit points) ÷ total credit points enrolled.
- On this scale a Fail, including a Withdrawn Fail, carries 0.5 grade points.
- Since 14 January 2020 UTS records GPAs on the 7-point scale; this scale is a guide only.
- WAM = Σ(MU) ÷ ΣU, where M is the mark received for a subject and U its credit points: multiply each mark by the subject's credit points, add the results and divide by the total credit points.
- The transcript WAM is cumulative over all completed subjects in the course; if you study more than one UTS course you get a separate WAM for each.
- Included: every subject graded with a mark (Pass, Credit, Distinction, High Distinction, Fail and Fail (X)), Withdrawn/Fail results, and subjects credited into the course from previous study at UTS.
- Not included: Pass/Fail subjects without marks, subjects graded without marks, and subjects exempted or given advanced standing for study at other institutions.
- The WAM used to decide a level of award (e.g. 'with Distinction' or Honours) may differ from the transcript WAM, for example when a faculty counts only the subjects of one award in a combined course.
Sources: University of Technology Sydney, Grade point average and weighted average mark (retrieved 2 Oct 2026); University of Technology Sydney, Grading schema for coursework subjects (retrieved 2 Oct 2026). Checked against the document on 2 Oct 2026.
| Grade | Marks (%) | Grade point | Meaning |
|---|---|---|---|
| HD | 85–100 | 7 | High Distinction |
| D | 75–84 | 6 | Distinction |
| C | 65–74 | 5 | Credit |
| P | 50–64 | 4 | Pass |
| Conceded pass | — | 0 | Conceded pass (awarded only prior to 2004) |
| X | — | 0 | Fail (X): 50% or more, but unsatisfactory performance in a compulsory component |
| Z | 0–49 | 0 | Fail (Z) |
| Withdrawn Fail | — | 0 | Withdrawn Fail |
| Ungraded Pass/Fail | — | Not in GPA | Ungraded subjects (Pass/Fail only) |
Coursework degrees at UTS that commenced from Autumn semester 2003; grade points on the 7.00 scale from 14 January 2020 (earlier GPAs recalculated).
Sources: University of Technology Sydney, Grade point average and weighted average mark (retrieved 2 Oct 2026); University of Technology Sydney, Grading schema for coursework subjects (retrieved 2 Oct 2026). Checked against the document on 2 Oct 2026.
| Grade | Marks (%) | Grade point | Meaning |
|---|---|---|---|
| HD | 85–100 | 4 | High Distinction |
| D | 75–84 | 3.5 | Distinction |
| C | 65–74 | 2.5 | Credit |
| P | 50–64 | 1.5 | Pass |
| F | 0–49 | 0.5 | Fail |
UTS grade points up to Spring 2019; UTS gives this scale as a guide for expressing a GPA on a 4-point scale.
Sources: University of Technology Sydney, Grade point average and weighted average mark (retrieved 2 Oct 2026); University of Technology Sydney, Grading schema for coursework subjects (retrieved 2 Oct 2026). Checked against the document on 2 Oct 2026.
| Grade | Marks (%) | Grade point | Meaning |
|---|---|---|---|
| HD | 85–100 | 7 | High Distinction |
| D | 75–84 | 6 | Distinction |
| C | 65–74 | 5 | Credit |
| P | 50–64 | 4 | Pass |
| X | — | 0 | Fail (X): 50% or more, but unsatisfactory performance in a compulsory component |
| Z | 0–49 | 0 | Fail (Z) |
| Ungraded Pass/Fail | — | Not in GPA | Pass/Fail subjects without marks |
UTS coursework degrees; the WAM is shown on UTS transcripts and the AHEGS from 14 January 2020.
Sources: University of Technology Sydney, Grade point average and weighted average mark (retrieved 2 Oct 2026); University of Technology Sydney, Grading schema for coursework subjects (retrieved 2 Oct 2026). Checked against the document on 2 Oct 2026.
Questions
How is UTS SGPA calculated?
SGPA is the average of your grade points weighted by credit points: multiply each course's credit points by the grade point for your grade, add these up, and divide by the total credit points. Under 7-point GPA (from 14 January 2020), HD carries 7 grade points on a 7-point scale.
How is UTS CGPA calculated?
CGPA is the average of the grade points of all courses taken so far, weighted by credit points.
Is OpenCGPA an official UTS calculator?
No. OpenCGPA is independent and not affiliated with University of Technology Sydney. It applies the rules published in UTS's own documents, linked on this page. Your official result is the one on your grade card.